Differences

This shows you the differences between two versions of the page.

--- modding:display [2020/03/28 21:55] – created xanathon
+++ modding:display [2020/03/31 20:05] (current) – xanathon
@@ Line 3: / Line 3: @@
 {{ :modding:vectorcpuunit.jpg?direct&200|}}I was able to find some information on the display used in Vector that may be helpful.
-It is from the manufacturer Santek, the model number is ST0103A2W-WSNLW-F. You can find the information on [[http://www.santechnology.com/products/|Santek's website]].
+It is from the manufacturer Santek (San Technology, Inc., San Diego, California), the model number is ST0103A2W-WSNLW-F. You can find the information on [[http://www.santechnology.com/products/|Santek's website]].
-The resolution is 184x96 Pixels, module size is 28.34x20.29x2.12 mm, active area is 23.18x12.10.
+The resolution of the IPS-display is 184 x 96 Pixels, module size is 28.34 x 20.29 x 2.12 mm, active area is 23.18 x 12.10 mm.
-I have yet to find someone that sells it.
+I have no idea if they sell it to end users in the USA or if they are B2B only. There seems to be a german subsidiary: Santek Europe GmbH, Mergenthalerallee 77, 65760 Eschborn, Deutschland
+Comment by Rob Simpson on Facebook (thanks for that): //We know the display was a custom unit, with a shorter ribbon cable made by this company:// https://www.trulyamerica.com/products/suggest-module-custom-request/
+Update: Here seems to be another variant with shorter cable that looks more correct than the first one above, this is by [[http://eechain.panelook.com/ST0103A2W-WSNLW-F-1-03inch-184x96-400nits-20pins-SPI-I-F-ST7789V-IPS-LCD-Module-detail_96361.html|Santek Japan]].
+~~DISCUSSION~~

TheDroidYouAreLookingFor

User Tools

Site Tools

Differences

Page Tools