modding:dismantled [TheDroidYouAreLookingFor]

Site Tools


modding:dismantled

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision
Previous revision
modding:dismantled [2020/03/27 09:25] xanathonmodding:dismantled [2020/03/27 23:22] (current) xanathon
Line 1: Line 1:
 ====== A Dismantled Vector ====== ====== A Dismantled Vector ======
  
-For your utter horror, here is an image of a dismantled Vector. Have no fear, it was a dead one with a defect CPU unit. I will most probably revice it later, if and when I get another defect one from Ebay as an organ donor. It is not dismantled completely, you can take some parts further apart, but this is enough for a lot of things to mod, e.g. changing the battery or adding a heatsink.+For your utter horror, here is an image of a dismantled Vector. Have no fear, it was a dead one with a defect CPU unit. I will most probably revive it later, if and when I get another defect one from Ebay as an organ donor. It is not dismantled completely, you can take some parts further apart, but this is enough for a lot of things to mod, e.g. changing the battery or adding a heatsink.
  
 The quality of the small robot is amazingly good, using serviceable parts and sockets instead of soldering everything together. That is in my opinion one cause for the original higher price. The quality of the small robot is amazingly good, using serviceable parts and sockets instead of soldering everything together. That is in my opinion one cause for the original higher price.
Line 9: Line 9:
 {{ :modding:allparts_w_numbers.jpg?direct&800 |}} {{ :modding:allparts_w_numbers.jpg?direct&800 |}}
  
-  01 display plexiglass cover +  01 display plexiglass cover (head front) 
-  02 inner body closure plate +  02 inner body closure plate 
-  03 treads +  03 treads 
-  04 front wheels +  04 front wheels 
-  05 front wheel caps +  05 front wheel caps 
-  06 head side plates +  06 head side plates 
-  07 screws and forklift axis +  07 screws and forklift axis 
-  08 head side ornaments +  08 head side ornaments 
-  09 back wheels +  09 back wheels 
-  10 back wheel caps +  10 back wheel caps 
-  11 head side parts (left and right) +  11 head side parts (left and right) 
-  12 robot body right side (with fork motor) +  12 robot body right side (with fork motor) 
-  13 robot body left side (with head motor) +  13 robot body left side (with head motor) 
-  14 backplate with button, LEDs, microphones and touch sensor +  14 backplate with button, LEDs, microphones and touch sensor 
-  15 "butt" plate +  15 "butt" plate 
-  16 main CPU unit and display (not shown, on the back) +  16 main CPU unit and display (not shown, on the back) 
-  17 front plate and laser scanner holder +  17 front plate and laser scanner holder 
-  18 weight +  18 weight 
-  19 motor control, charging board and front sensor (difficult to see above the battery) +  19 motor control, charging board and front sensor (difficult to see above the battery) 
-  20 battery +  20 battery 
-  21 forklifts and fork+  21 forklifts and fork 
 + 
 + 
 +~~DISCUSSION~~
modding/dismantled.1585297535.txt.gz · Last modified: 2020/03/27 09:25 by xanathon