For your utter horror, here is an image of a dismantled Vector. Have no fear, it was a dead one with a defect CPU unit. I will most probably revice it later, if and when I get another defect one from Ebay as an organ donor. It is not dismantled completely, you can take some parts further apart, but this is enough for a lot of things to mod, e.g. changing the battery or adding a heatsink.

The quality of the small robot is amazingly good, using serviceable parts and sockets instead of soldering everything together. That is in my opinion one cause for the original higher price.

Disclaimer: The yellow-black-silver elongated thingies are not part of the robot. ;)

01 display plexiglass cover
02 inner body closure plate
03 treads
04 front wheels
05 front wheel caps
06 head side plates
07 screws and forklift axis
08 head side ornaments
09 back wheels
10 back wheel caps
11 head side parts (left and right)
12 robot body right side (with fork motor)
13 robot body left side (with head motor)
14 backplate with button, LEDs, microphones and touch sensor
15 "butt" plate
16 main CPU unit and display (not shown, on the back)
17 front plate and laser scanner holder
18 weight
19 motor control, charging board and front sensor (difficult to see above the battery)
20 battery
21 forklifts and fork